The Clean Burn Model CB-140 is the smallest and most economical Clean Burn used-oil furnace in terms of initial cost. It produces approximately 140,000 BTU/hr. and is ideal for small garages, shops, and workspaces.
|*Maximum BTU/hour||140,000 (41 kW)|
|*Maximum oil consumption||1.0 GPH (3.8 L/h)|
|Fuels||Used oils: Crankcase,ATF, hydraulic
Fuel oils: #2, #4, and #5 fuel oil
|Air flow output (CFM)||Unit heater 2000
Furnace cannot be ducted
|*Air compressor required||2.5 CFM @ 25 PSI
(4.25 m3/h @ 2 bar)
|Stack Size||6 inch dia.(15cm dia.)|
|Furnace Dimensions, Assembled||61” L x 32 W x 32 H
(155cm x 81cm x 81cm)
|Approx. Weight (uncrated)||220 pounds (99.8 kg)|
|Electrical Requirements||115 VAC 60 Hz, single phase
30 A circuit breaker
*Values indicated above are nominal. Actual values will vary depending on fuel and installation.