The Clean Burn Model CTB-500 waste oil boiler has an input rating of 500,000 BTU/hr and an output rating of 372,000 BTU/hr. The CTB-500 is UL listed for use in central heating systems. It can be used in combination with any Clean Burn boiler to create a system perfectly sized for any facility.
The CTB-500 is the largest of it’s product line. You spend 30 minutes cleaning every 1000 hours of operation. It is uniquely designed for installation flexibility. Engineered for use as a single boiler unit, or as part of a combination of CTB-500 boilers working as a larger system.
|BTU/hour input:||500,000 / 146.5 kW|
|BTU/hour output:||372,000 / 109.0 kW|
|Fuels||Used oils: Crankcase,ATF, hydraulic
Fuel oils: #2, #4, and #5 fuel oil
|Heating Surface||97 sq. ft. / 9.0 sqM|
|Boiler water volume||20.6 gal. / 78 L|
|Design water flow per coil||37 gpm / 140 lpm|
|Cabinet dimensions||66.38″ L x 40″ W x 42″ H
169cm x 102cm x 107cm
|86.13″ L x 43.5″ W x 47.85″ H
219cm x 111cm x 122cm
|Approx. Weight||1600 lbs. / 725.7 kg|
|Electrical Requirements||115 VAC 60 Hz single phase*
*230V/ 50Hz units also available
|Maximum oil consumption||3.57 GPH / 13.5 lph|
|Stack size||10″ / 25cm|
|Air compressor required||2.5 CFM @ 25 PSI
4.25 m3/h @ 1.7 bar
|Recommended clean-out||1000 hours|
*Values indicated above are nominal. Actual values will vary depending on fuel and installation.